0 item(s)
View cart
You have no items in your shopping cart.
Cherne ® 3/4" Kwik Sure ® Plug, PSI 180
The Cherne 3/4" Kwik Sure plug (part #269-867) is a high-pressure mechanical test plug rated for 180 PSI. Designed for quick pipe sealing on 3/4" lines — the Kwik Sure...
$ 8.01
Cherne ® 8" Inside-of-pipe Gripper ® Plug,17 PSI - 40 ft.
The Cherne 8" Inside-of-Pipe Gripper (part #270-288) is the largest mechanical Inside-of-Pipe Gripper in the Cherne line — built for internal sealing of 8" sewer and storm drain pipe. Rated...
$ 74.98
Locking Well Monitoring Cap, 4" includes collar and padlock
The EMCO Wheaton A0720-001 is a 4" locking well monitoring cap and collar assembly. Threads or solvent-welds onto standard 4" PVC well casing to provide tamper-resistant security for monitoring wells....
$ 69.32
4" Torquer Locking Well Plug SCH 80
The Koby 4" Torquer Locking Well Plug (T4 80) seals monitoring well casings from the inside using an internal expansion design — no metal parts means no corrosion or rust...
$ 13.04
3/4" Torquer Locking Well Plug
The Koby 3/4" Torquer Locking Well Plug (T.75) seals monitoring well casings from the inside using an internal expansion design — no metal parts means no corrosion or rust contamination....
$ 9.16
Cherne 4" Econ-O-Grip low-pressure blocking Plug
The Cherne 4" Econ-O-Grip plug (part #271-543) is a low-cost mechanical blocking plug for 4" pipe — rated for 2 PSI maximum. Natural rubber O-ring with galvanized metal plates and...
$ 8.80
Cherne ® 1" Kwik Sure ® Plug, PSI 40
The Cherne 1" Kwik Sure plug (part #269-875) is a high-pressure mechanical test plug rated for 40 PSI. Designed for quick pipe sealing on 1" lines — the Kwik Sure...
$ 8.11
Cherne ® Air-Loc ® 6-10" Parachute
The Cherne Air-Loc 6"-10" Parachute (part #015-403) is a deployment parachute for the Cherne Air-Loc leak locator system on 6" to 10" sewer pipe. Guides the blocking plug to the...
$ 112.05
2" FlushLock Locking Well Plug SCH 80
The Koby 2" FlushLock Locking Well Plug (FL280) sits flush with the well casing top — the right choice when above-grade caps are not permitted in paved areas, roadways, or...
$ 12.48
Cherne ® 2-1/2" Kwik Sure ® Plug, PSI 72
The Cherne 2-1/2" Kwik Sure plug (part #269-913) is a high-pressure mechanical test plug rated for 72 PSI. Designed for quick pipe sealing on 2-1/2" lines — the Kwik Sure...
$ 25.30
Cherne ® 1-1/2" Sure-Grip ® Water and Air testing Plug, 22 PSI
The Cherne 1-1/2" Sure-Grip plug (part #271-158) is a tool-free mechanical test plug for water and air testing on 1-1/2" Schedule 40 and Schedule 80 pipe. Rated for 22 PSI...
$ 6.75
2" PVC female threaded well point
The Koby 2" PVC female threaded well point (BE22F) is a drive-point screen for direct-push or driven well installations. PVC construction eliminates metallic contamination of groundwater samples. ASTM F-480 2tpi...
$ 4.13Equipment for Every Stage of the Monitoring Well Lifecycle
Whether you’re installing a new monitoring well network, conducting Phase II ESA sampling, or maintaining a long-term remediation site, the hardware you use determines data quality. Cross-contaminated samples, tampered wells, and failed seals aren’t just operational headaches — they’re regulatory liability.
We supply environmental consultants, remediation contractors, and water utilities with the well security and sampling equipment they need to keep sites compliant and data defensible.
Shop by Application
Well Security & Sealing
Locking well plugs (Torquer, FlushLock, J-Plug, H-Plug) seal the well from inside the casing. Locking well caps (Grip-N-Lock) fit over the exterior and are faster for routine sampling access. Both accept padlocks for chain-of-custody documentation.
Vapor & Gas Monitoring
Torquer vapor extraction plugs and Ex-Cap fittings allow controlled gas sampling and vapor recovery while maintaining a secure seal. These are specified in landfill gas monitoring programs, soil vapor extraction systems, and Phase II ESAs requiring VOC screening.
Groundwater Sampling
Groundwater bailers for grab sampling in monitoring wells. Disposable polyethylene and PVC bailers eliminate cross-contamination between wells. Permanent PVC bailers for dedicated single-well programs. Available individually or in cases of 24.
Ordering for Multi-Well Projects
Most of our well monitoring customers order for 20–200+ well sites. Call (866) 514-3684 to get volume pricing, confirm casing compatibility, and coordinate mixed-size shipments. We ship same-day on in-stock items ordered before 1pm CT.
FAQ
What’s the difference between a well plug and a well cap?
A plug seals from inside the pipe casing using an expansion gasket. A cap fits over the outside of the pipe. Plugs create a flush or below-grade seal; caps extend above the casing and are quicker to remove for sampling access.
What equipment do I need for Phase II ESA monitoring wells?
At minimum: locking well plugs or caps (for well security between sampling events), groundwater bailers (for grab samples), and if VOC screening is required, vapor extraction plugs. We can help you spec the full list — call (866) 514-3684.
Do you supply for projects across multiple states?
Yes. We ship nationwide and regularly supply multi-site remediation projects. One order can include mixed sizes and product types shipped to a single location or split across project sites.
