0 item(s)
View cart
You have no items in your shopping cart.
3" Torquer Locking Well Vapor Extraction Plug SCH 40
The Koby 3" Torquer Vapor Extraction Plug (T3VE) enables vapor and groundwater sampling through a vented port without removing the plug — preserving well integrity and preventing cross-contamination. Internal expansion...
$ 47.74
Cherne 1"-1.25" Monitor Well Locking Plug
The Cherne 1"-1.25" Monitor Well Locking Plug (part #271-648) is a pneumatic locking plug for 1" to 1-1/4" monitoring wells. Pneumatic inflation provides a secure seal for groundwater monitoring well...
$ 31.60
Cherne ® 5" Stainless Steel Econ-O-Grip ® Plug
The Cherne 5" Stainless Steel Econ-O-Grip plug (part #273-358) is a chemical-resistant blocking plug for 5" pipe in petroleum and chemical environments. Nitrile rubber O-ring with stainless steel hardware. Rated...
$ 68.09
Cherne ® 18" Aluminum T-Handle Gripper ® Plug (Non By-Pass)*
The Cherne 18" Aluminum T-Handle Gripper (part #272-888) is the largest mechanical T-Handle Gripper available — a 30 lb aluminum plug for full shutoff on 18" concrete and clay sewer...
$ 881.53
Cherne ® 4" Hub-Fit Gripper ® Plug
The Cherne 4" Hub-Fit Gripper (part #270-548) is a mechanical test plug for 4" hub fittings and bell-end pipe — the most common hub size in residential plumbing. Rated for...
$ 24.84
3/4" Torquer Locking Well Plug SCH 80
The Koby 3/4" Torquer Locking Well Plug (T.75 80) seals monitoring well casings from the inside using an internal expansion design — no metal parts means no corrosion or rust...
$ 15.52
QuickFilter® 0.45 µm Groundwater Filter 609 cm² with Bailer Interface Tube
The Aqua Bailers QuickFilter QF045 is a high-capacity, single-use 0.45 µm groundwater filter with 609 cm² of filtration area and an included Bailer Interface Tube. Insert the tube directly into...
$ 27.00
2" Plastic FaceTest gas gauge 0-100 PSI
The 2" Plastic Face Test Gas Gauge 0-100 PSI (part #000-648) is a test pressure gauge for pipe and gas line testing. 2" plastic face with 0-100 PSI range for...
$ 11.13
Cherne ® 6" Aluminum T-Handle Gripper ® Plug (Non Bypass)
The Cherne 6" Aluminum T-Handle Gripper (part #272-892) is a heavy-duty mechanical test plug for full pipe blockage on 6" underground sewer and storm pipe — no bypass, complete shutoff....
$ 236.95
Cherne ® 6" T-Handle Gripper ® Plug with 1/4" Bypass
The Cherne 6" T-Handle Gripper with Bypass (part #272-949) is a heavy-duty aluminum mechanical test plug with a 1/4" NPT male bypass nipple for controlled flow during sewer air pressure...
$ 284.99
Monitor Well Safety Lockout tag Kit
The Koby Monitor Well Safety Lockout Tag Kit (SLT) provides OSHA-compliant lockout/tagout capability for monitoring well plugs. Super-bright safety yellow tags with bold well ID lettering. Tamper-resistant design assures well...
$ 9.37
Cherne PVC 5" Test-Kap Mechanical Plug
The Cherne 5" PVC Test-Kap (part #270-776) is a mechanical test plug designed specifically for PVC DWV pipe testing. The Test-Kap slides over the outside of 5" Schedule 40 PVC...
$ 24.71Equipment for Every Stage of the Monitoring Well Lifecycle
Whether you’re installing a new monitoring well network, conducting Phase II ESA sampling, or maintaining a long-term remediation site, the hardware you use determines data quality. Cross-contaminated samples, tampered wells, and failed seals aren’t just operational headaches — they’re regulatory liability.
We supply environmental consultants, remediation contractors, and water utilities with the well security and sampling equipment they need to keep sites compliant and data defensible.
Shop by Application
Well Security & Sealing
Locking well plugs (Torquer, FlushLock, J-Plug, H-Plug) seal the well from inside the casing. Locking well caps (Grip-N-Lock) fit over the exterior and are faster for routine sampling access. Both accept padlocks for chain-of-custody documentation.
Vapor & Gas Monitoring
Torquer vapor extraction plugs and Ex-Cap fittings allow controlled gas sampling and vapor recovery while maintaining a secure seal. These are specified in landfill gas monitoring programs, soil vapor extraction systems, and Phase II ESAs requiring VOC screening.
Groundwater Sampling
Groundwater bailers for grab sampling in monitoring wells. Disposable polyethylene and PVC bailers eliminate cross-contamination between wells. Permanent PVC bailers for dedicated single-well programs. Available individually or in cases of 24.
Ordering for Multi-Well Projects
Most of our well monitoring customers order for 20–200+ well sites. Call (866) 514-3684 to get volume pricing, confirm casing compatibility, and coordinate mixed-size shipments. We ship same-day on in-stock items ordered before 1pm CT.
FAQ
What’s the difference between a well plug and a well cap?
A plug seals from inside the pipe casing using an expansion gasket. A cap fits over the outside of the pipe. Plugs create a flush or below-grade seal; caps extend above the casing and are quicker to remove for sampling access.
What equipment do I need for Phase II ESA monitoring wells?
At minimum: locking well plugs or caps (for well security between sampling events), groundwater bailers (for grab samples), and if VOC screening is required, vapor extraction plugs. We can help you spec the full list — call (866) 514-3684.
Do you supply for projects across multiple states?
Yes. We ship nationwide and regularly supply multi-site remediation projects. One order can include mixed sizes and product types shipped to a single location or split across project sites.
