0 item(s)
View cart
You have no items in your shopping cart.
Cherne ® 1-1/2" Kwik Sure ® Plug, PSI 88
The Cherne 1-1/2" Kwik Sure plug (part #269-891) is a high-pressure mechanical test plug rated for 88 PSI. Designed for quick pipe sealing on 1-1/2" lines — the Kwik Sure...
$ 12.54
Cherne ® 2" Stainless Steel Econ-O-Grip ® Plug
The Cherne 2" Stainless Steel Econ-O-Grip plug (part #273-328) is a chemical-resistant blocking plug for 2" pipe in petroleum and chemical environments. Nitrile rubber O-ring with stainless steel hardware for...
$ 21.47
Cherne ® 1-1/2" Stainless Steel Econ-O-Grip ® Plug
The Cherne 1-1/2" Stainless Steel Econ-O-Grip plug (part #273-318) is a chemical-resistant blocking plug for 1-1/2" pipe in petroleum, chemical, and corrosive environments. Nitrile rubber O-ring with stainless steel hardware...
$ 19.63
Cherne ® 2" End-of-Pipe Gripper ® Plug, 17 PSI - 40 ft.
The Cherne 2" End-of-Pipe Gripper (part #270-229) is a mechanical test plug that seals at the end of 2" pipe and won’t fall in. Rated for 17 PSI / 40...
$ 8.80
Cherne ® 12" Aluminum T-Handle Gripper ® Plug (Non Bypass)
The Cherne 12" Aluminum T-Handle Gripper (part #272-922) provides full pipe blockage on 12" underground sewer and storm pipe — no bypass, complete shutoff. Rated for 10 PSI / 23...
$ 454.67
Square Well Protector, Steel Lid, 4" X 5' Tall
The EMCO Wheaton A0727-004S is a 4" square well protector standing 5 feet tall with a steel raintight cap. Designed to protect monitoring well casings from vandalism, weather, and accidental...
$ 270.72
1/2" Torquer Locking Well Plug
The Koby 1/2" Torquer Locking Well Plug (T.5) seals monitoring well casings from the inside using an internal expansion design — no metal parts means no corrosion or rust contamination....
$ 8.98
Cherne 1-1/2" Econ-O-Grip low-pressure blocking Plug
The Cherne 1-1/2" Econ-O-Grip plug (part #271-519) is a low-cost mechanical blocking plug for 1-1/2" pipe — rated for 2 PSI maximum. Natural rubber O-ring with galvanized metal plates and...
$ 4.15
2" PVC male threaded well point
The Koby 2" PVC male threaded well point (BE22M) is a drive-point screen for direct-push or driven well installations. PVC construction eliminates metallic contamination of groundwater samples. ASTM F-480 2tpi...
$ 4.13
Cherne ® 3" Hub-Fit Gripper ® Plug
The Cherne 3" Hub-Fit Gripper (part #270-538) is a mechanical test plug for 3" hub fittings and bell-end pipe connections. Rated for 13 PSI / 30 ft. head pressure. Fits...
$ 21.00
Cherne ® 4" End-of-Pipe Gripper ® Plug, 17 PSI - 40 ft.
The Cherne 4" End-of-Pipe Gripper (part #270-245) is the most commonly used mechanical test plug for standard 4" DWV pipe testing. It seats at the pipe end and cannot fall...
$ 14.53
Cherne ® Jet-Ball, Cleaning Balls, 6-10 in. with eye bolts
The Cherne Jet-Ball Cleaning Ball 6"-10" (part #254-207) is a sewer cleaning ball for 6" to 10" pipe with eye bolts for retrieval. Deploy through manholes to scour pipe walls...
$ 333.55Equipment for Every Stage of the Monitoring Well Lifecycle
Whether you’re installing a new monitoring well network, conducting Phase II ESA sampling, or maintaining a long-term remediation site, the hardware you use determines data quality. Cross-contaminated samples, tampered wells, and failed seals aren’t just operational headaches — they’re regulatory liability.
We supply environmental consultants, remediation contractors, and water utilities with the well security and sampling equipment they need to keep sites compliant and data defensible.
Shop by Application
Well Security & Sealing
Locking well plugs (Torquer, FlushLock, J-Plug, H-Plug) seal the well from inside the casing. Locking well caps (Grip-N-Lock) fit over the exterior and are faster for routine sampling access. Both accept padlocks for chain-of-custody documentation.
Vapor & Gas Monitoring
Torquer vapor extraction plugs and Ex-Cap fittings allow controlled gas sampling and vapor recovery while maintaining a secure seal. These are specified in landfill gas monitoring programs, soil vapor extraction systems, and Phase II ESAs requiring VOC screening.
Groundwater Sampling
Groundwater bailers for grab sampling in monitoring wells. Disposable polyethylene and PVC bailers eliminate cross-contamination between wells. Permanent PVC bailers for dedicated single-well programs. Available individually or in cases of 24.
Ordering for Multi-Well Projects
Most of our well monitoring customers order for 20–200+ well sites. Call (866) 514-3684 to get volume pricing, confirm casing compatibility, and coordinate mixed-size shipments. We ship same-day on in-stock items ordered before 1pm CT.
FAQ
What’s the difference between a well plug and a well cap?
A plug seals from inside the pipe casing using an expansion gasket. A cap fits over the outside of the pipe. Plugs create a flush or below-grade seal; caps extend above the casing and are quicker to remove for sampling access.
What equipment do I need for Phase II ESA monitoring wells?
At minimum: locking well plugs or caps (for well security between sampling events), groundwater bailers (for grab samples), and if VOC screening is required, vapor extraction plugs. We can help you spec the full list — call (866) 514-3684.
Do you supply for projects across multiple states?
Yes. We ship nationwide and regularly supply multi-site remediation projects. One order can include mixed sizes and product types shipped to a single location or split across project sites.
