The gripNlock / Snap Cap Monitoring Well Cap
<a href="http://www.macromedia.com/go/getflashplayer">Flash Required</a>
Flash Required
(gripNlock / Snap Cap) Monitoring Well Cap
Mallet driven installed, the new "gripNlock", is a redesigned version of the old Snap Cap. This new tamperproof Cap is instantly watertight and secured when tapped in place.

Above and below grade monitoring well locking cap.

2" and 4" (fits SCH 40 & 80)

Heavy duty Nylon construction, w/ high impact, heat resistant, UV protected w/ chemical resistant properties. This cap is completely inert, and has a square UV Protective Gasket.

Multiple concentric rings placed in the base of the cap provide maximum security and added watertight integrity to the well. The top of the cap has a large API warning label where a well #___ space is provided. The cap is colored in a highly recognizable color for both below grade and above grade protective riser pipes.

Product:



Application/Use:

Dimensions:

Materials/Construction:



Description:
designed with Homestead
INSTALL CAP WITH MALLET
"NO GLUE or SCREWS"
The Grip-N-Lock is a female Nylon locking cap that is hammered in place either above grade or below grade.  It's held secure by 10 internal watertight concentric rings, and the square UV Protective Gasket creates a watertight compression seal.  A bold SEWER warning label is on top of the cap, and a standard #1 padlock can easily be used, even in small manholes.

  * The Cap is only 3” tall when installed.
  * Recommended by several State and County regulatory agencies.
  * Easy Installation, Watertight Security, Locking Capability, and             High Visibility.  This Cap will be an excellent investment for high           traffic areas and profile sights.
  * Inexpensive, EDP Feels Anything More is Money Down the Toilet.

This hard-hitting Nylon Cap is built for the worst environment, easy installation and cost efficient.  This cap does not require screwing, riveting or gluing, “JUST HAMMER IT ON”.



INSTALL WITH HAMMER
"NO GLUE"
New “gripNlock” Snap Cap:
  • Watertight & Lockable
  • "New" Long Lasting Colors
  • Embossed Monitoring Well Label
  • Permanently Attached Gasket
New Color Formula:
  • "Orange"
  • "Yellow"
  • "White"
New Long Lasting Colors
2" or 4" Protective Riser Pipe
All New Colors
2" gripNlock & Plug
8" Manhole
Above or Below Grade,
the 2" & 4" gripNlock
Vented Locking Well Caps, (see below)
The gripNlock now has optional features, the new features have been designed for both the 2" or 4" wells.  We now provide options for installing dedicated level loggers water level data loggers with wireline, cord, or direct read cables. The vented locking well cap can suspend a level logger, barologger, submersible pump, bladder, and more in one well, and still provides an access hole for other monitoring equipment. The Cap can be securely locked shut, and is vented to equalize atmospheric pressure.

  •    Optional designs provides multiple installation options
  •    Additional access hole for monitoring equipment
  •    Supports up to two level loggers
  •    Lockable, secure installation
  •    Durable, sturdy design


2" & 4" Vented Locking Well Caps